Curtis PSB350BT - Manuel (Page 10)

Before using the speaker
Plug the power cord to a wall outlet (120V～60Hz). Status indicator will be red .
3.5mm AUX/RCA inputs operation
1. Ensure that the unit is well connected to the TV or other audio device via
the accompanied 3.5mm-RCA cable.
2. While in Power On mode, press the button on the main unit
repeatedly or press the AUX/RCA button on remote control to select the
AUX/RCA input mode.
3. Operate your audio device directly for playback features.
4. Press “▲” / “ ” button on remote control or tap the“+”/ “-” button on the
main unit to raise/lower the volume level.
Note: If the 3.5mm AUX-IN socket and the RCA socket are both connected, the
3.5mm AUX input mode will be the default choice. To select the RCA input
mode, make sure the 3.5mm Aux in socket is not plugged in
Connect and use the speaker (Bluetooth mode)
1. Power on the speaker.
2. Change to Bluetooth mode. Status indicator will blink blue.
3. On your Bluetooth device, turn on Bluetooth and scan for device in its
Bluetooth menu. When “PSB350BT” appears on the device list of your
Bluetooth device, select and connect .
4. The status indicator will change to solid blue after Bluetooth pairing
established.
8