Scanning film, Using the film holders – Epson R 4990 Manuel d'utilisation

Page 6

Advertising
background image

6

Scanning Film

Scanning Film

Your scanner includes four film holders and a film area guide. Each film holder
allows you to scan multiple images at once, and the film area guide allows you to
scan up to 8 × 10 inch film. You can scan up to twenty-four 35mm filmstrip
images, eight 35mm slides, three 120/220 (6 × 12 cm) film images, two 4 × 5 film
images, or film and contact sheets up to 8 × 10 inches.

Note:
For instructions on scanning 8 × 10 inch transparencies, see the on-screen
Reference Guide.

Using the Film Holders

To scan film, you’ll need to remove the reflective document mat and place the film
in a holder.

1. Make sure the transparency unit cable is connected to the option interface

connector on the back of the scanner. (If it is not connected, turn off the
scanner, connect the transparency unit cable, then turn the scanner back on.)

2. Lift the scanner lid all the way up and pull

the reflective document mat up and off of
the scanner lid, as shown.

Advertising