Pioneer AVIC-D1 - Manuel (Page 11)

<CRD3983A> 11
10
ENG/MASTER 96
English
Español
Deutsch
Français
Italiano
Nederlands
For information on other leads
Blue
To Auto-antenna relay control terminal.
If the vehicle has a glass antenna, connect to
the antenna booster power supply terminal
(max. 300 mA 12 V DC).
This product
Note:
Audio source will be set to mute or attenuate,
while the voice guidance of the navigation
will not be muted or attenuated. For details,
see the “Operation Manual”.
ront speaker
Rear speaker
Right
Note:
When connecting the blue lead to the auto antenna and using
the auto antenna function, the vehicle’s antenna can be stowed
by following the instructions below.
- In the INITIAL menu, select “RADIO” for “AUTO
ANTENNA” and change the source from radio to another
source
- Turn the source off
- Turn off the ignition switch (ACC OFF)
For more detailed information on changing the “AUTO
ANTENNA” mode, refer to “Switching the auto antenna
setting” in the “Operation Manual”.
Yellow/black
If you use equipment with a mute function (e.g.
cellular telephones), connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute
lead free of any connections.
Note:
Cords for this product and those for other products
may be different colors even if they have the same
function. When connecting this product to another
product, refer to the supplied manuals of both prod-
ucts and connect cords that have the same function.
☞
See Page 11.