Troubleshooting – Danby DWC3509EBLS Manuel d'utilisation

Page 7

Advertising
background image

If none of the above rectify the situation please contact our customer care department at

1-800-26-

(1-800-263-2629)

BEFORE YOU CALL FOR SERVICE

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

1) No power.

• A fuse in your home may be

blown or a circuit breaker tripped

• Power surge

• Plug is not fully insterted into

wall outlet.

• Replace fuse or reset circuit

breaker.

• Unplug the wine cooler, wait a

few

seconds and plug back in.

• Make sure the 3-prong plug is

fully inserted into outlet.

2) Cabinet temperature too

high.

• Temperature Setting.

• Door not shut properly or

opened excessively.

• Interior lights toggled on.

• Exhaust vent is obstructed.

• Recently added large quantity of

warm bottles to cabinet.

• Verify the temperature control

setting; adjust if necessary.

• Ensure door is fully closed and

the gasket is sealing against the

cabinets. Open door only as

needed and for short periods of

time.

• The interior lights are intended

for temporary lighting of cabinets

for display purposes only. They

are not intended to be left on for

prolonged periods of time.

• Verify that nothing is blocking

front-mounted exhaust vent.

• Limit quantity of warm bottles

introducted at the same time.

Stagger the load introduction if

possible.

3) Condensation on the cabinet

and/or doors.

• High humidity conditions in the

home.

• Ensure door is fully closed and

gasket is sealing against the

cabinet. Open the door only as

needed and for short periods of

time.

6

Advertising