Maytag MHW3000BG - Manuel (Page 8)

8
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
n Not all cycles, temperatures, and options are available on all models.
n All wash temperature selections feature a cold rinse.
n Not all temperatures, spin speeds, or soil levels are labeled on the control panel.
Cycle: Wash
Temperature:
Spin
Speed:
Soil
Level:
Available
Options:
Cycle Details:
Items to wash
using default
cycle settings:
CYCLE GUIDE
Clothing, bedding
and towels requiring
sanitization
Using the highest wash temperature
available along with an Oxi product
added in the drum ensures
sanitization. Check recommended
wash temperature of your items
and use the amount of Oxi
recommended by the manufacturer.
Sanitize
with Oxi †
Fresh Spin ™
Extra Rinse
Delay Start
Heavy
Normal
Light
Hot Extra High
Med
Low
Normaly soiled sheets,
pillowcases, light
blankets, or throws
Small loads of
3–4 lightly soiled
garments
For small loads (3 –4 items) needed
quickly. This cycle combines high-
speed tumbling, a shortened wash
time, and an extra-high-speed spin
for reduced drying times.
The wash action of this cycle is
designed to keep large items from
tangling and balling up.
Bedding
Rapid Wash Fresh Spin ™
Extra Rinse
Delay Start
Fresh Spin ®
Extra Rinse
Delay Start
Heavy
Normal
Light
Heavy
Normal
Light
Hot
Warm
Cold
Hot
Warm
Cold
Extra High
Med
Low
Extra High
Med
Low
Sturdy colorfast
fabrics and heavily
soiled garments
High-speed tumbling and an extra-
high-speed final spin help provide
optimal cleaning and reduce drying
times.
Heavy Duty Fresh Spin ™
Extra Rinse
Delay Start
Heavy
Normal
Light
Hot
Warm
Cold
Extra High
Med
Low
† Sanitize with Oxi
n This washer has a Sanitize with Oxi Cycle that eliminates 99.9%
of bacteria typically found on clothing, bedding, and towels, based
on independent, third-party laboratory testing. There is no carryover
of bacteria between loads after the cycle is complete.
n Use the Sanitize with Oxi Cycle to clean heavily soiled, colorfast
fabrics. This combines the hottest water temperature to help ensure
the removal of heavy soils and stains. It is recommended that you set
your hot water heater to 120°F (49°C) to ensure proper performance
during this cycle.
Load Size Recommendations
For best results, follow the load size recommendations noted for each
cycle.
Small load: Fill the washer drum with 3–4 items, not more than
1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes
can tumble freely. For best results, avoid packing tightly.