Maytag MVWB880BW - Manuel (Page 9)

9
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efficiency detergents. The package will
be marked “HE” or “High Efficiency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced rinsing
performance. It may also result in component failures and noticeable
mold or mildew. HE detergents are made to produce the right
amount of suds for the best performance. Follow the manufacturer’s
instructions to determine the amount of detergent to use.
HELPFUL TIP: See “Washer Maintenance” for information
on recommended method of cleaning washer dispensers.
4.
Add HE detergent to dispenser
6.
Add liquid fabric softener
to dispenser
Pour a measured amount of liquid
fabric softener into dispenser; always
follow manufacturer’s directions for correct amount of fabric softener
based on your load size. Then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected to ensure
proper distribution at correct time in cycle. Do not overfill or dilute.
Overfilling dispenser will cause fabric softener to immediately
dispense into washer.
If Extra Rinse option is selected, fabric softener will be dispensed
in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
7.
Press POWER/CANCEL to turn
on washer
Detergent dispenser
Fabric softener dispenser
5.
Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 3/4 cup (180 mL). For
maximum soil and stain removal, you may use the liquid chlorine
bleach dispenser for liquid chlorine bleach or color-safe bleach.
Liquid chlorine
bleach dispenser
NOTE: Do not add single-dose laundry packets, Oxi-type boosters,
or fabric softener crystals to dispensers. They will not dispense
correctly.