Kleenmaid TI282XT1 - Manuel (Page 9)

9
A beep and a flashing 0 show that the zone
concerned has been lighted.
You can then choose the desired power.
If you do not set the power, the cooking zone
will turn itself off automatically.
S
tart/Stop
Using your hob in all simplicity
Operates when cooking zones concerned are
working. You can modify cooking times and
any time.
To stop the beep press any
control key in the cooking zone concerned. It will
stop by default after about 1 minute.
*depending on the model
manual stopping
automatic stopping
Locked
Controls can be locked:
- Either when turned off (cleaning)
- Or during use (the operations in progress continue
and the settings displayed stay active).
However when in the locked position, the "STOP"
touch control has priority and cuts off the power to
the oven.The display turns off after a few seconds.
It can be reactivated by touching any touch control.
bleep
bleep
C
hild safety
Unlocked
The two zones located on the same side
have a total power of 3600 W, which is
divided up automatically between them.
This implies, for example, that using maximum
power in one zone will lead to the other zone's
power being reduced automatically which will be
shown on the power display.
Max
0
1...12
0....99mn
0
bip bip
3 , 4 sec
3 , 4 sec
bip..bip
0
soft setting 6 = SIMMERING
power setting 10 = COOKING
rmaximum setting = BOILING Max
S
etting the timer*
S
etting manual power
9962 6151.qxd 18/09/02 16:01 Page 9