Dolmar Gasoline Chain Saws PS-34 - Manuel (Page 3)

3
The DOLMAR PS-34 and PS-45 will be delivered in a protective cardboard box to prevent transport damage. Card-
board is a basic raw material and is consequently reuseable or suitable for recycling (waste paper recycling).
This product complies with: American National Standard Institute B 75.-2000 chain saw safety standard.
Canadian Standards Association Z62.-03 chain saw safety standard.
Z62.3-04 chain saw kickback standard.
Society of Automotive Engineers SAEJ 335-Jun 95 „Multiposition small
engine exhaust system fire ignition
suppression”
The Emissions Compliance Period referred to on the emission Compliance label indicates the number of operat-
ing hours for which the engine has been shown to meet federal emissions requirements. Category C= 50 hours,
B= 25 hours, and A= 300 hours.
With the purchase of this chain saw you have chosen a German quality product. Important instructions for the
assembly and operation of this saw are given in this manual. For your own safety, we ask you to read the acci-
dent prevention instructions very carefully before putting your chain saw into operation, as incorrect handling can,
despite all precautions, lead to accidents. With a little care and attention you will have good service and lasting
satisfaction from this first-rate product. The following industrial property rights apply: DE 19722629.
RE Y
WARNING !
Careless or improper use of this product can cause serious or even fatal injury.
Before operating a chain saw or other DOLMAR products it is important that you read, fully understand and
carefully follow the instructions outlined in this owners manual. Kickback may cause severe or fatal injury and
is one of many potential dangers in operating a chain saw. Kickback and other safety related precautions are
described in detail within this owners manual. Additional owners manuals are available from DOLMAR POWER
PRODUCTS, PO Box 5007, Alpharetta, GA, 30005-5007, USA, Telephone 1-888-OPE-PART or info@dolmar.
com
Contents Page
Delivery inventory .................................................... 4
Symbols ................................................................... 4
Safety precautions ..............................................5-6
Denomination of components ................................ 7
Technical data........................................................ 8
Approved bar and chain combinations .................. 8
Mounting the guide bar and saw chain .............9-20
Checking the chain tension ................................... 2
Safety chain brake ................................................. 2
Fuel / Refuelling................................................22-23
Checking the chain lubrication............................... 24
Starting the engine ................................................ 25
Stopping the engine............................................... 25
Checking the safety chain brake ........................... 26
DOLMAR PS-34, PS-45
Contents Page
Set idle speed ........................................................ 26
Sharpening the saw chain ................................27-28
Cleaning the brake band and sprocket .................. 29
Cleaning the guide bar .......................................... 29
Replacing the saw chain........................................ 30
Replacing the fuel filter .......................................... 30
Cleaning the air filter.............................................. 30
Replacing the spark plug ....................................... 3
Replacing / cleaning the spark arrester screen ..... 3
Instructions for periodic maintenance .................... 32
Service, spare parts and guarantee .................32-33
Troubleshooting ..................................................... 33
Extract from the spare parts list ............................. 34