Ubiquiti Networks NanoStatioM - Manuel (Page 6)

4
NanoStation ™ M/NanoStationloco ™ M Quick Start Guide
Installation Requirements
• 10 mm wrench
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through
the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
Typical Deployment
NanoStationloco
LAN or Computer to
Ethernet Port labeled
LAN on PoE Adapter
Ethernet Port on
Ubiquiti Device to
Ethernet Port labeled
POE on PoE Adapter
Connect the Power Cord
to the PoE Adapter and
a power outlet
POE
Host Computer IP Address
192.168.1.x
LAN
Default IP Address
192.168.1.20
NanoStation