Paradigm Monitor Surround 3 v7 - Manuel (Page 26)

24
TROUBLESHOOTING GUIDE
No Sound
from One
or More
Speakers
Make sure receiver, preamp or amplifier is
plugged in and turned on. Check power
outlet at the wall is working. Are headphones
plugged in, or is system on Mute? Re-check
all connections.
Check your balance or Paradigm VC-150
Volume Control (if using). Check that all power
cords are properly plugged in and functioning.
Swap a non-working speaker with one that
works to determine if the problem is with the
speaker or something else (i.e. wiring, amplifier).
One or more speakers may be connected
out of phase (their polarity is reversed). Re-
check to ensure that each speaker’s cable
is connected with correct polarity: red (+) to
red (+) and black (-) to black (-).
No Sound
Lack of
Bass or
Dislocated
Image