Doro 515C - Manuel (Page 10)

English
EN 7
Phonebook
Memory
The telephone has 4 one-touch memories and 10 two-touch memories for
frequently dialled telephone numbers.
When a number is stored in memory, you need only press one or two buttons
dependent on location to make a call. The one-touch memories are numbered
M1-M4, two-touch memories are stored using the telephone keypad digits 0-9.
Storing One-Touch Memories
1. Press
P
.
2. Enter the phone number to be stored (up to 22 digits). Press
P
.
3. Enter name. Press the corresponding number key one or more times for the
first letter (see the table for the Phonebook). Press
P
.
4. Select memory location (M1-M4) by pressing the corresponding button.
Dialling using One-Touch Memories
1. Pick up the receiver and wait for a dialling tone.
2. Select the desired memory location (M1-M4) by pressing the corresponding button.
Storing speed dial memory locations
1. Press
P
.
2. Enter the phone number to be stored (up to 22 digits). Press
P
.
3. Enter name. Press the corresponding number key one or more times for the
first letter (see the table for the Phonebook). Press
P
.
4. Select a memory location by pressing one of the keypad numbers
0
-
9
.
Dialling using speed dial memories
1. Pick up the receiver and wait for a dialling tone.
2. Press
m
.
3. Select the number by pressing the relevant keypad number
0
-
9
.
Press
r
if you want a pause in the telephone number.
If you need to change a number, store the new number in the same location as the old one.