Troubleshooting – Danby DDW611WLED Manuel d'utilisation

Page 22

Advertising
background image

Troubleshooting

Occasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use this troubleshooting guide for
a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800-
263-2629
for assistance.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Dishwasher doesn’t
run

• Fuse blown or circuit breaker tripped.

• Power supply is not turned on.

• Water pressure is low.

• Replace fuse or reset circuit breaker.
• Make sure dishwasher is turned on and
door is closed. Plug in cord securely.

• Check that water supply is connected and
the water is turned on.

Noise

• Some audible sounds are normal.

• Utensils are not secure in basket / some-
thing small dropped into basket.
• Motor hums.

• Sound from soft food shredding action
and detergent cup opening.
• Ensure everything is secured in the dish-
washer.
• If you do not use often, dishwasher
may hum- remember to fill and pump
out appliance every week to keep the seal
moist.

Suds in the tub

• Improper detergent.

• Spilled rinse agent.

• Use only dishwasher detergent to avoid
suds. If suds are present, open the door
and let suds evaporate.
• Always wipe rinse agent spills immediate-
ly.

Dishes are not dry

• Rinse agent dispenser is empty.

• Make sure that the rinse agent dispener is
filled.

Dishes and flatware
are not clean (spots
filming)

• Improper program selected/run.
• Improper rack loading.

• Extremely hard water.

• Select a stronger program.
• Make sure that the detergent dispenser
and spray arms are not blocked by large
dishware.
• Remove all metal utensils from dishwash-
er

Detergent left in dis-
penser cups

• Dishes blocking detergent cups.

• Re-load the dishes properly.

Water standing in
the bottom of the
tub

• This is normal.

• A small amount of clean water around the
outlet on the tub button at the back of the
tub keeps the water seal lubricated.

Water doesn’t pump
out of the tub

• Drain is clogged.

• Pump motor faulty.

• Make sure the kitchen sink is draining
well. If the dishwasher drains into a dispos-
er, run it clear.
• Have it checked by a qualified technician.

Dishwasher leaks /
steams

• Overfill dispenser or rinse aid spills.
• Dishwasher isn’t level.
• Steam is normal.

• Be careful not to overfill the rinse aid
dispenser. Spilled rinse aid could cause
oversudsing and lead to overflowing. Wipe
away any spills with a damp cloth.
• Make sure the dishwasher is level.
• Steam coming through the vent by the
door latch is normal during drying and
water draining. 9

PROBLEM

POSSIBLE CAUSE

SOLUTION

20

Advertising