Doro 311C - Manuel (Page 5)


English
Memory
The telephone has 3 one-touch and 10 two-touch memories. One-touch
memories are stored in M1, M2 & M3, two touch memories are stored
using the telephone keypad digits 0-9.
Storing One-touch Memories
1. Lift the handset, press and release
P (ignore anything you hear in the
earpiece).
2. Select a memory location M1, M2 or M3 by pressing the corresponding
button.
3. Enter the telephone number to be stored (up to 21 digits).
4. Press and release
P
again.
5. Replace the handset. The number is now stored.
Dialling using One-touch Memories
1. Lift the handset and wait for a dialling tone.
2. Select a memory location by pressing the corresponding memory
button (M1, M2 or M3). The stored number will now be dialled.
Storing Two-touch Memories
1. Lift the handset, press and release P (ignore anything you hear in the
earpiece).
2. Press and release m .
3. Select a memory location by pressing one of the keypad number
buttons
0
-
9
.
4. Enter the telephone number to be stored (up to 21 digits).
5. Press and release P again.
6. Replace the handset. The number is now stored.
Dialling using Two-touch Memories
1. Lift the handset and wait for a dialling tone.
2. Press and release
m .
3. Select a memory location by pressing the relevant keypad number
0 -
9 . The stored number will now be dialled.
Press and release
r
if you need to insert a pause in a telephone number. The name
or number stored in memory can then be entered on the memo list if wished. If a stored
number changes, follow the procedures above entering the new number in the same location
as the old one.