phil&teds traveller 3 - Manuel (Page 6)

TRAVELLER
Safety Warnings / Avertissements / Warnungen / Advertencias / Waarschuwing
The traveller complies with requirements applicable in
market of sale, refer www.philandteds.com/certification
WARNINGS
Europe:
Read the instructions carefully before use and
keep them for future reference. Your child’s
safety may be affected if you do not follow these
instructions.
• Be aware of the risk of open fire and other
sources of strong heat, such as electric bar
fires, gas fires, etc. in the vicinity of the cot.
• Do not use the cot if any part is broken, torn or
missing and use only spare parts approved by
the manufacturer.
• Do not leave anything in the cot or place the
cot close to another product, which could
provide a foothold or present a danger of
suffocation or strangulation, e.g. strings, blind/
curtain cords, etc.
• Do not use more than one mattress in the cot.
• Before using the traveller, ensure all locking
mechanisms are engaged. Check carefully that
they are all fully engaged before use.
• If you leave the child unattended in the
traveller, always make sure the side access
panels are zipped closed.
• Ensure that all components of the frame are
regularly checked for a secure and tight fit.
• To prevent injury from falls, do not use the
traveller when the child is able to climb out of
the cot.
• It is recommended that the mattress supplied
by the manufacturer is used. The thickness
of the mattress shall be such that the internal
height (surface of the mattress to the upper
edge of the cot frame) is at least 500mm.
The size (1150mm by 570mm) of the mattress
shall be such that there is no gap greater than
30mm between the mattress and the sides
and ends of the cot.