Phil & teds, 280-c, 280 nest assembly – phil&teds nest Manuel d'utilisation
Page 7
NEST
Instructions / Gebrauchsanweisung / Instrucciones / Instructies
13
2
1
NOTE: Fabric is assembled to wire before
wire is clipped into base
C
REVISIONS
REV.
DESCRIPTION
DRAWN
APPROVED
DATE
A
Initial release
GB
FvP
2010-05-27
B
Fabric details moved to fabric spec
FVP
FVP
2010-09-28
C
Base Updated
FVP
FVP
2010-11-11
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
506-894-C
Nest injection molded plastic
base
1
2
506-902-A
Nest steel wire hoop
1
PROJECT ref.
Solid models of plastics supplied by Phil&Teds generally do not include draught and do not include shrinkage allowance. Dimensions highlighted on this drawing
indicate areas requiring special attention. Phil&Teds must approve variations to the Phil&Teds supplied solid model. Any changes will be propagated to the solid
model. Phil&Teds will then issue updated models and drawings, as these models must represent the final, as used, product.
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
SCALE:
1:3
SIZE:
DRAWING No:
SHEET 1 OF 1
REV.
DATE
APPROVALS
APPROVED
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
TOLERANCES ARE:
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
FvP
A3
DECIMALS ANGLES
0 DECIMAL PLACE 0.5mm 2
1 DECIMAL PLACE 0.1mm 1
2 DECIMAL PLACE 0.05mm 0.5
CAD MODEL:
PART No:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PHIL AND
TEDS MOST EXCELLENT BUGGY COMPANY LIMITED ("Phil&Teds") ANY REPRODUCTION IN
PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Phil&Teds IS PROHIBITED.
13/11/2009
MODELED
DRAWN
2009-11-13
27/5/10
CHECKED
507-280-C
507-280-C
-
507-280
Nest Assembly
100
90
80
70
60
50
40
30
20
10
0
27/5/2010
DG
COLOUR:
-
DG
FvP
NAME/DESCRIPTION:
®
..
..
adapt & survive
phil & teds
102-112 daniell street, newtown
wellington, new zealand
www.philandteds.com
ph: +64 4 3800 833
-
S:\_2- Implementation\1- Engineering WIP\2- Drawings\Nest\
C
-