Compex Systems TP1016F - Manuel (Page 6)

2 Compex MicroHub

/6 (TP1006C);
Compex MicroHub

/8 (TP1008C);
Compex MicroHub

/16 (TP1016C/ TP1016F)
English
Socket (TP1006C/TP1008C --
connect to keyboard)
♦ ♦ Optional jack for tapping keyboard’s 5V power
supply.
Caution: Compex will not be liable for any damage arising from using the hub operated
from either the keyboard power tap or mouse port tap. Please check with your
computer equipment vendor on the availability of not less than 300mAmp at 5V
DC on your mouse or keyboard socket.
±±
Features:
♦ Cost effective, unmanaged hub allowing interconnection of different
media such as Fiber Optic or Thin (BNC) or Thick (AUI) with UTP
segments within a single device.
♦ Connects up to 6;/ 8;/ 16 UTP 10Base-T link; and one Thin (BNC) and/or
one Thick (AUI) Ethernet link or one Multi-mode Fiber Optic Link.
♦
Detects network collisions and alerts all participating host devices.
Amplifies and re-times received signals and transmits the signals to
attached host devices in the event of a collision.
♦ Preamble regeneration, signal retiming and restoration, extension of
fragmented packets and jabber function for automatic partitioning to
isolate network failure.
♦ Global power, collision, jabber LEDs and individual port Link/Activity
LED to aid network diagnosis and management.
♦ Performs full 10Mbps Ethernet multi-port repeater functions and complies
with IEEE802.3 standard for 10Base-T Unshielded Twisted Pair (UTP);
and 10Base-2 Thin Coaxial (BNC) or 10Base-5 Thick Coaxial (AUI) or
10Base-F (Fiber Optic).
♦ TP1016F has 10Base-FL Port that support long distances up to 2km.
±±
Specifications:
♦ Industry
Standards: Complies with IEEE802.3, 10Base-T and 10Base-2,
10Base-5 or 10Base-FL standard, FCC Class A, CE
Mark.
♦
Interface: Supports 6;/ or 8;/ or 16 station ports for either clients,
servers or downlink hubs. A designated Uplink port
provides easy cascading to another hub: Port #1 (button
shift Left) for TP1008C or TP1006C; and Port #1 (button
released OUT) for TP1016C or TP1016F.
♦ Link Distance
♣
10Base-T : Requires UTP (3,4 or 5) cable.
Maximum segment length is 100m.
♣
10Base-FL : Requires Multi-mode fiber Optic cable
with wave length 820nm. Maximum length is 2 km.
♦
Uplink and
Downlink ports: Requires 2 twisted-pairs UTP cable (Category 3, 4, and
5). Segment length can be up to a maximum of 100
meters. When cascading using the Uplink port, the
segment length can be up to a maximum of 100 meters.