General system functions, Advanced system functions – CompuSTAR 2WG5R-900SH Manuel d'utilisation

Page 9

Advertising
background image

17 By Firstech, LLC

By Firstech, LLC 16

General System Functions

Your system is equipped with two additional outputs that can be configured to control windows, open power sliding doors, open a power sliding moon roof, or

even turn on a rear defroster. These outputs can be configured for pulsed, timed or latched settings. Your authorized Firstech dealer can set these outputs up

accordingly. Using auxiliary outputs to control additional vehicle functions will require additional parts and can be rather labor extensive.

Tap button for 0.5 second to trigger auxiliary output 1. Tap button for 0.5 second to trigger auxiliary output 2. The vehicle’s parking lights will

flash once and/or siren chirp once indicating that the auxiliary outputs have been triggered.

By default, the system is in secure auxiliary mode, which requires you to hold button for 2.5 second prior to triggering auxiliary 1 or 2.
To turn off secure auxiliary, ask your authorized Firstech dealer to turn on Option 4-5 to setting II.

a•˜‰Œ‰’™@o•”•”“@O@w‰Ž„—@rŒŒMd—Ž@O@sŒ‰„‰Ž‡@d’“

Upon lock/arm and unlock/disarm, you can eliminate vehicle’s audible confirmation by muting the siren. Normally, the siren will chirp once to indicate
the system is locked/armed and twice to indicate the system is unlocked/disarmed. To mute the siren tap buttons simultaneously for
0.5 second. When the siren is muted, the siren icon will no longer be displayed on the LCD.

IMPORTANT: Even when the siren is muted, it will still go off in the event the alarm is triggered.

s‰Œ…Ž”@a’@O@d‰“’

Advanced System Functions

Tap buttons simultaneously for 0.5 second to turn drive lock on and off (also known as ignition controlled door locks). The vehicle’s

parking lights will flash once and/or siren chirp once to confirm drive lock is off. The vehicle’s parking lights will flash twice and/or siren chirp twice to

confirm drive lock is on.

IMPORTANT: Drive lock mode requires that the dealer turn on Option 1-9. Drive lock has two settings;
Default 1: Off
Option 2: Locks the doors when the ignition is on and after the brake is depressed.
Option 3: locks the doors when the RPM’s have reached two times that of idle speed (this setting requires that a tachometer wire is connected).

With both settings, the doors will unlock when the ignition is turned off. If using this feature on a manual transmission vehicle, the doors will unlock
upon setting the emergency / parking brake.

The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local

authorized Firstech dealer to be active.

d’‰–…@lƒ‹@O@Œ‡Ž‰”‰Ž@cŽ”’ŒŒ…„@d’@lƒ‹“

This feature can not be turned on with the 2 Way remote. The built in turbo timer keeps the vehicle’s engine running for either 1, 2, or 4 minutes
(programmable from dealer) after the vehicle key has been removed from the ignition. This feature will keep oil running through the turbo system to allow
for appropriate cooling time. Tap buttons simultaneously for 0.5 second to turn on or off turbo mode. The remote will beep once and green
LEDs will flash to confirn that turbo mode is activated. The remote will beep twice and LEDs will flash twice to confirn that turbo mode is off
IMPORTANT: To utilize this feature, the emergency / parking brake wire must be connected to the Firstech system. Consult your local authorized dealer

for installation.

t•’‚@t‰…’@m„…

Advertising
Ce manuel est liée aux produits suivants: