Installation procedure, Acaution – Kenwood Cassette-Receiver KRC-160 Manuel d'utilisation
Page 18
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
INSTALLATION PROCEDURE
d) Before starting Installation, disconnect the negative (-) terminal of the battery. This will
prevent short circuits.
<S> Connect the Input and Output leads p.19).
<D Connect the Ground lead (Black) to the metal body of the car (c^p.19).
<S> Connect the Memory backup lead (Yellow) (>t^p.l9).
0 Connect the Power supply lead (Red) (“^p.19).
<D Install the unit in the car {«f^p,20).
0 Connect the negative (-) terminal of the battery.
ACAUTION
A short circuit may cause a blown fuse. A short circuit is a serious problem that could
also cause a fire. Check the wiring carefully and, if any wires are short-circuited, rewire
immediately. If no short-circuits are found, replace the fuse with one having the same
rating (see indication in fuse box).
Check that no unconnected wires or connectors are in contact with the body of the
car. Extraneous noise or current entering the system can cause malfunction or
damage.
To provide more power, this product is equipped with a BTL (Balanced Transformer
Less) system. But in this type of system, sharing different speaker terminals or
connecting or grounding speaker terminals to the car can cause distortion or damage.
18
Installation