One rinse, 2nd rinse, Normal / casual – Kenmore 110.2962* Manuel d'utilisation

Page 6: Delicate, Handwash, Rinse & spin, Spin only, Tioubleshootiig - souids and lems, Heavy duty

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

One Rinse

This is the rinse at the end of each cycle.

2nd Rinse

Choose this option for an automatic 2nd rinse cycle.

__________________________________|L

Heavy Duty

Use this cycle for cottons and linens used regularly. For
maximum soil removal, you should set the Cycle Selector
(Timer) Control for the longest available time.

Normal / Casual

Select this cycle for synthetic fabrics such as dress shirts,
blouses, and slacks. The cycle will give you a load-cooling
spray rinse to reduce wrinkling.

Delicate

This cycle combines slow-speed agitation and slow-speed
spin to gently clean garments while reducing wrinkles.

Handwash

Use this cycle for special care items. This cycle features
a series of brief agitations and short soaks for gentle

cleaning and for minimal wrinkling.

2nd Rinse

A second rinse can be used to aid in improved removal of
detergent or bleach residue from garments. This option may
be automatically added to the wash cycle by setting the
OPTIONS Control to 2nd Rinse anytime before the end
of the cycle.

Rinse & Spin

Select this option if you think an extra rinse is needed. Set
OPTIONS Control (if available) to One Rinse. You should then
set the Cycle Selector (Timer) Control knob to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set OPTIONS Control (if available)
to One Rinse. You should then set Cycle Selector (Timer)
Control to a Spin setting.

TiOUBLESHOOTIiG - SOUIDS and LEMS

Before you call service...check for the following.

Loud clicking and banging?

• The yellow shipping strap may still be in the rear of the

washer. Completely remove the yellow shipping strap.

• The washer should be level, and the feet should be firmly

on the floor.

Some sounds are normal but may be different from
those of your previous washer.

• The gears engaging after the drain and before the spin.

• The sound of air being pulled through the pump after most

of the water has drained.

Is the washer leaking?

• Fill hose connections are tight

• Gaskets in fill hose are tight and flat

• Drain hose clamp is securely attached

• Faucets, drain/standpipe, or laundry tub is not leaking

• The washer tub is centered, and the load evenly balanced

at the start of each load

• The washer is level

• The front feet are installed, and the nuts are tightened

to the cabinet

See the Use and Care Guide for complete details.

W10026673A

© 2008 Sears Brands, LLC.

® Registered Trademark / ™ jrademark /

Service Mark of

Sears Brands, LLC, used under iicensee by Sears Canada Inc.

7/08

Printed in U.S.A

Advertising
Ce manuel est liée aux produits suivants: