V-h screw setting – Panasonic CXDP610EUC Manuel d'utilisation
Page 15
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
You can install this unit either horizontally, at 22.5“ ,45° ,67.5° or vertically. See the figure below for mounting
angle.
□ V-H Screw Setting
Loosen two V-H screws, one on the right side and the other on the left of the CD changer unit, and slide them
to position V, H, 22.5°, 45°, or 67.5°. (The V-H screws are originally set to position H before shipment from the
factory.)
• Horizontal mounting :
Slide the V-H screws to position H.
• Mounting at 22.5°
: Slide the V-H screws to position 22.5°.
• Mounting at 45“
: Slide the V-H screws to position 45°.
• Mounting at 67.5°
: Slide the V-H screws to position 67.5°.
• Vertical mounting
: Slide the V-H screws to position V.
Por Right side
CX-DP610EUC
15