Outdoor Great Room Electric Grill CNE20 - Manuel (Page 8)

Cleaning and Maintenance
ALWAYS BE SURE THE GRILL IS UNPLUGGED
BEFORE CLEANING
Periodically, remove the grilling grates and
searing plate and wash in soap and warm water.
Use a wash cloth or vegetable brush to clean the
cooking grids.
CAUTION: Never try to clean the cooking grids
until they are cool to the touch.
Cleaning the Grease Drawer, vaporizor Plate,
and Aluminum Tray
To reduce the chance of fire, the grease drawer
vaporizor plate and aluminum tray should be
inspected before each grill use. Remove any
grease from the tray and scrape any residue off
the surface of the vaporizor plate. Wash with
soap and warm water. Aluminum tray should be
replaced often. To order more trays, contact your
dealer and reference part number SRVLGE60.
As with all appliances, proper care and
maintenance will keep this grill in top operating
condition. By following these cleaning
procedures on a regular basis, your Fire Stone
Legacy Grill will stay clean and work properly
with minimum effort.
WARNING Fire & Shock Risk
1. Remove the grilling grate on left for cleaning.
The vaporizer plate is designed to pull out for
cleaning with the grease tray from the back of
the unit. It can be removed for cleaning or just
scaped into place.
2. Using a putty knife or similar utensil, carefully
scrape the area below the heating element on
the left side for optimal performance.
Be careful NOT to scrape the heating element
directly.
WARNING Fire & Shock Risk
Do not line the bottom of the grill housing
with aluminum foil, sand or any substance that
will restrict the flow of grease into the grease
draining tray and receptacle.
n Failure to comply with these instructions could
result in a fire or explosion which could
cause property damage, serious bodily
injury or death.
CAUTION: Be sure the grill is OFF and cool before
cleaning.
Burning-off the grill after every cookout will
keep it ready for instant use. However, once a
year you should give the entire grill a thorough
cleaning to keep it in top operating condition.
Follow these steps:
1. Unplug the grill.
2. Brush the inside and bottom of the grill with
a stiff wire brush, and wash with soap and
warm water. Rinse thoroughly and let dry.
Cleaning Exterior Surfaces
Before initial use, and periodically thereafter,
wash the grill using soap and warm water. Use a
wash cloth or sponge for this process. Do not use
a stiff wire or brass brush that might scratch the
stainless steel surface.
Cleaning Exterior Surfaces–Stainless Steel
Weathering and extreme heat can cause exterior
stainless steel surfaces to turn tan in color.
Follow these steps for the best cleaning results:
1. Remove dirt or grease using hot water &
soap and a soft cloth. Then, polish and treat
the stainless surfaces using only an approved
stainless steel care product. Never use abrasive
cleaners or scrubbers as they will damage the
surface as well as destroy the printed graphic
surfaces used for operating instructions.
2. Finish by wiping your grill clean with a soft
cloth and allow to air dry before starting the
grill.
Black Porcelain or Powder Coated Finish
1. Folow directions above and/or use a glass
ceaner (i.e. Windex), for best results.
8
CAUTION: The OFF/ON rocker switch
found on the front panel of the Fire Stone
Legacy 20 i/e Electric COOK NUMBER
GRILL™ operates as a MANUAL switch and
DOES NOT shut off automatically. This is
a design feature which enables extended
grilling times for slow roasting.
Cook Number Grill ®