Bissell PowerSteamer 1692 series - Manuel (Page 14)

Troubleshooting (Continued)
PowerSteamer is not picking up solution and water.
Possible Causes
O ReadyTools Dial may be at the wrong setting
for cleaning job.
O
Nozzle Window may not be properly attached.
O Tank-in-Tank Lid is not properly installed.
O Tank-in-Tank is not properly seated.
0 Poor tool position.
(Handheld attachments only)
© Tank-in-Tank has picked up the maximum
dirty water.
Remedies
O Set ReadyTools Dial to either FLOOR
CLEANING orTOOLS/PRETREAT.
0 Make sure the two tabs on the back
of the Floor Nozzle Window are
inserted through the mating slots in
the main housing. Reinstall
if necessary.
O Reinstall lid; refer to section
The Basics, page 6.
© Tank-in-Tank must be firmly seated to
function. Remove and reseat Tank-in- Tank.
© Readjust angle; apply more
downward pressure.
© Empty tank and refill; refer to
The Basics section, page 6.
Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operations, call 1 -800-263-2535.
Please do not return this product to the store
BISSELL Consumer Services
For information about repairs or repiacement parts, or questions about
your warranty, caii:
BISSELL Consumer Services
1-800-263-2535
Monday-Friday 8 a.m.-10 p.m. ET
Saturday 9 a.m.-8 p.m. ET
Or write:
BISSELL Canada Corporation
Box 1003
Niagara Falls, ON L2E 6W2
ATTN: Consumer Services
Or visit the BISSELL website — www.bissell.com
When contacting BISSELL, have modei number of unit avaiiabie.
Piease record your Modei Number:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Piease record your Purchase Date:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
NOTE; Please keep your original sales receipt. It provides proof of date of purchase in the
event of a warranty claim. See “Warranty” on page 16 for details.
EN-FR-CA-15608-UPD5_ug310-5907_1692-1694_205.indd 14