Voltage Valet V4RB - Manuel

Instructions
Limited One Year
Warranty Caution
We guarantee each new converter against
defects in material or workmanship for
a period of one year from the date of
purchase. During the warranty period, we
will either, at our option, repair or replace
a product that proves to be defective. The
above warranty shall not apply to defects
resulting from: accident, unauthorized
modifications, misuse, abuse, overloading,
or improper maintenance. To obtain war-
ranty service, the product must be returned
to the address indicated below. Customer
shall prepay all shipping charges for a
product returned to us for warranty service
and we shall pay for return of the product
to customer. However, customer shall pay
all shipping charges, duties, and taxes for a
product returned to us from another coun-
try. WE MAKE NO OTHER WARRANTIES,
EITHER EXPRESSED OR IMPLIED, WITH
RESPECT TO THIS PRODUCT. WE SPE-
CIFICALLY DISCLAIM THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
We shall not be responsible for any other
loss or damage that may arise through the
use by a purchaser or others of this device,
and the purchaser assumes and will hold
Hybrinetics, Inc. harmless in respect to all
such loss. This warranty gives you specific
legal rights, and you may also have other
rights that vary from state to state.
Important: This is a factory-direct war-
ranty. Do not return defective products
to your retailer. All defective products
must be returned to the factory. For
questions or further information, please
call our toll free number: (800) 247-6900.
Important please read...
n All Voltage Valet converters are equipped
with an internal shutoff and reset sys-
tem. Should it ever become overworked,
it will automatically shut itself off. Should
this occur, remove the converter from
outlet and allow a short period for it to
cool down and reset itself.
n At times there may be a low humming
sound in the converter—this is normal.
Voltage Valet Division, Hybrinetics, Inc.
P.O. Box 14399, 225 Sutton Place
Santa Rosa, California 95407
© 2010 Hybrinetics, Inc.
1. To prevent electric shock or fire, connect
directly to a grounding receptacle.
2. To reduce the risk of electric shock—
Disconnect power to the receptacle
before installing or removing the con-
verter. When removing receptacle cover
screw, cover may fall across plug pins or
receptacle may become displaced.
3. Use only with 110/120 volt AC duplex
receptacle having center screw; and
secure unit in place with receptacle
cover screw.
4. Do not place or store converter where it
can fall or be pulled into a tub or sink.
5. Do not place in or drop into water or
other liquid.
The Voltage Valet Reverse Converter
is designed for use with 220/240 volt
motorized, electronic or heating ap-
pliances rated up to 40 watts, includ-
ing battery chargers, camcorders,
cell phones, digital cameras, electric
shavers, CD/MP3/DVD players, oral
hygiene devices, and PDAs.
WARNING–To reduce the risk of
burns, electrocution, fire or injury to
persons:
1. Use this converter only for its
intended use as described in this
manual. Do not use attachments
not recommended by the manu-
facturer. Do not plug converter
into an extension cord.
2. Never operate this converter if it
has a damaged plug, if it is not
working properly, if it has been
dropped or damaged, or dropped
into water. Return the converter to
factory for examination and repair.
3. Never obstruct air circulation to
converter.
4. Never drop or insert any object
into any openings or holes.
5. Do not use outdoors.
6. For use with 110/120 volt AC
electricity.
7. Converter will not work with direct
current (DC).
Operating Instructions
1. Turn off power to the receptacle at
the fuse box or circuit breaker.
2. Remove receptacle cover plate
screw. (Do not remove cover
plate.)
3. Plug converter into lowest outlet.
Place screw through converter
screw ring and reattach cover
plate.
4. Turn on power to receptacle.
5. Insert your appliance plug into the
converter.
40 Watt
Reverse Electricity Converter
Model V4RB
40 Watt
Reverse Electricity Converter Save these instructions