Thetford 2117 Series 636691 - Manuel (Page 6)

Owner’s Manual 6
To remove the top full shelf (See Art01829):
- Locate the screws that attach the plastic clips [202] (one screw is on the
bottom of each side).
- Remove and save the screws and the plastic clips.
- Pul the top full shelf forward [203] to remove.
- To reinstall the top full shelf, do this procedure in the opposite order.
Adjustable cantilever shelves:
The cantilever shelves of the refrigerator and freezer are easily adjustable to
meet your food storage needs.
The top shelf on the left side of the freezer holds the ice stor-
age bin for the automatic icemaker. Do not move or remove
this shelf when the ice maker is in use.
The half shelves in the refrigerator are not all the same depth.
They are designed to give clearance for the items in the door
bins. The upper shelves will ONLY fit into the upper area
[204] of the support rails and the lower shelves will ONLY fit
into the lower area [205] of the support rails (See Art01835).
DO NOT try to put a shelf where it will not fit.
To remove a cantilever shelf (See Art01831):
- Locate the shelf retainer [54] on the bottom of each shelf.
Do not remove the screw in the shelf retainer.
- Loosen the screw [41] in the shelf retainer between 2-3 turns.
- Slide the shelf retainer toward the front [f] of the shelf.
- Lift the front of the shelf up [d] and pull the shelf up and out [e] of the support
rails( See Art01832).
- To reinstall the cantilever shelf, do this procedure in the opposite order.
- The round head of the screw should align with the round recess in the
shelf retainer.
Art01835
204
205
Art01831
41
54
f
d
Art01832
e
NOTICE
NOTICE
NOTICE