Thetford 2117 Series Owners Manual - Manuel (Page 5)

Owner’s Manual 5
To remove the crisper covers (See Art01824):
- With the crisper closed, lift the crisper cover[135] to the fully raised position.
- Locate the hinge pins[71] that are part of the crisper cover rails [197].
- Push the front of one of the crisper cover rails inward toward the crisper so you can
lift that side of the crisper cover off of the hinge pin.
- Slide the opposite side of the crisper cover off of the other hinge pin.
- To reinstall the crisper covers, do this procedure in the opposite order.
To remove the crispers (See Art01826):
- Pull each crisper forward until it reaches the “stop” position.
- Lift up on the front of the crisper [a] and continue to pull the crisper out [b].
- To reinstall the crispers, do this procedure in the opposite order.
To remove the beverage bin and beverage bin cover (See Art01827):
- Pull the beverage bin [198] forward [c] and remove.
- Pull the beverage bin cover [199] forward [c] until it disengages from
the bottom full shelf [200] with a “snap”.
- To reinstall the beverage bin cover:
- Align the rear of the beverage bin cover with the center brackets of
the bottom full shelf.
- Push the beverage bin cover back into the bottom full shelf until it
engages with a “snap”.
To remove the bottom full shelf (See Art012828):
- Remove the crisper covers, the crispers, the beverage bin and the
beverage bin cover.
- Locate the two (2) screws [41] that attach the bottom full shelf [200] (one screw
is on the bottom of each side).
- Remove and save the screws and the plastic spacers [201].
- Using both hands, lift the front of the bottom full shelf up [d].
- Pull the bottom full shelf up and out [e].
- To reinstall the bottom full shelf, do this procedure in the opposite order.
To remove the top full shelf (See Art01829):
- Locate the screws that attach the plastic clips [202] (one screw is on the
bottom of each side).
- Remove and save the screws and the plastic clips.
- Pul the top full shelf forward [203] to remove.
- To reinstall the top full shelf, do this procedure in the opposite order.
Art01826
a
b
Art01827
198 199
200
c
Art01828
201
41
d
e
200
Art01829 202
203