Refrigerator care checklist, Defrosting – Thetford 1210 Series AC - Current Manuel d'utilisation

Page 9

Advertising
background image

Owner’s Manual 9

Defrosting

The cooling fins of the refrigerator operate at below freezing temperature and will naturally form frost from humidity, which is always

present in the air. The humidity inside the refrigerator increases:

- with higher outside temperature and humidity.

- with the storage of non-sealed fresh foods or warm foods.

- with the amount of time that the door(s) are open.

- with any air leakage into the refrigerator.

Although the refrigerator is not frost -free, it is made to limit frost on the cooling fins. At regular intervals, the temperature control system

automatically melts most of the frost from the cooling fins. The water from the cooling fins drains into a collection cup that is attached to

the back of the refrigerator. The heat of the cooling system evaporates the water from the collection cup.

It is normal for frost to collect inside the freezer. Excess frost decreases the cooling performance of the refrigerator. Defrost the

refrigerator and freezer as necessary:

- Remove all food from the refrigerator.

- Turn the refrigerator OFF.

NOTE: Defrosting the refrigerator makes excess water inside the refrigerator.

- Remove the drain hose from the drip cup at the rear of the refrigerator.

- Put the drain hose into a half-gallon or larger container to capture water.

Refrigerator Care Checklist

Your refrigerator will give you years of trouble free service if you do these simple checks every three to six months:

- Keep the food compartment and the freezer clean. See “Cleaning”.

- Defrost the refrigerator as necessary. See “Defrosting”.

- Make sure the door seals correctly. See “Door Sealing“.

- Be aware of any cooling changes that are not because of weather, loading, or control changes. If changes occur, contact your

dealer or service center.

- Make sure the air flow in the lower intake vent, through the refrigerator coils and condenser, and out the upper exhaust vent is not

blocked or decreased.

- Make sure the area behind the refrigerator is clear. Do not use the area behind the refrigerator for storage of anything, especially

combustible materials, especially gasoline and other flammable vapors and liquids.

4. Allow the freezer to cool enough and ice production will begin to fill the storage bin [61.

NOTE: New plumbing connections and/or impurities in the water supply line after winterizing can cause the first ice to be discolored or

have an odd flavor.

5. To stop the ice maker, push the ice maker arm up to the OFF position [62].

Advertising