Mediasonic BR-100 - Manuel

When connected to a PC
When not connected to a PC
1. Connect the included 3.5 mm cable
to the Line Out port on the unit and
the Line In port on your device.
2. Press the Power Button to
power the unit on.
1. Connect the included Micro USB to
USB charging cable to the Micro
USB Charging Port port on the unit
and the USB port on a computer.
or other charging device.
The device will now charge.
Note: Initial charging time 2.5 hours.
Please charge fully before use.
Power Indicator
Pair Indicator
Pairing
Connecting
Charging
1. Press the Power Button.
2. The Pair Indicator will flash slowly
when searching, then quickly to
enter pairing mode. If this does
not occur, press the Pair button.
3. Using the native controls
on your Bluetooth device,
select the “BR-100” to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specific device for instructions on pairing
and connecting Bluetooth devices.
4. Press the Power Button to turn
off and disconnect the BR-100.
Status Indicator
Power Off No light
Charging Red light
Fully Charged
Green light
(when powered on)
Status Indicator
Power Off No light
Power On Green light
Low Power Green flashing light
Status Indicator
Searching Slowly flashing light
Pairing Mode Quickly flashing light
Paired Solid light
USB
Charging
port
BT
indicator
Charging
indicator
Power/ Pair
button
Line-out
jack
Note: If the unit can't be powered on the
then retry.
first time, this maybe caused by the low
battery capacity, connect the charging
cable and charge the unit for a while