Recording cue marks – Sony TCM-4TR Manuel d'utilisation
Page 26
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
Recording Cue Marks
While recording, you can record a special signal on
the tape to mark a specific position.
CUE MARKER
At the desired position, press CUE MARKER to
record a signal.
The REC lamp goes off and a signal will be
recorded on the tape. If you want to record a signal
longer than that, press CUE MARKER as long as
you want.
During cue and review, you will hear the beep
sound at the marked position. During playback,
you will not always hear the beep sound at the
marked position, and even if you hear it, the sound
will be very soft.
26
EN
Advertising