Sony DPP-MS300 - Manuel (Page 24)

Printing an image from video equipment (continued)
Note
When the print mode dia^
is set to "SB (index)/'
you cannot store an image
on the memory by
pressing CAPix/RE.
When you select “VIDEO
MOTION'
When you set INPUT
SELECT to "VIDEO
MOTION/' the selected
image is blur-
compensated in step 3.
Re-selecting the image
Press PICTURE. The
playback picture appears
on the screen.
If you press CLEAR ALL,
the printer is reset to
standby mode.
Perform printing
procedures from the
beginning.
Printing
1
Set the print mode dial to "D (standard)."
2
Start playback on the video equipment.
While the INPUT indicator lights up, the playback
picture appears on the screen (input picture).
For details on playing back on your video
equipment, refer to the instruction manual of your
equipment.
MDilOnY
PICTURE
3
Press CAPTURE when the picture you want to
print appears on the screen.
The selected full-size image appears in the center of
the screen, and the MEMORY indicator lights up.
INPUT
D
CAPTURE
2 4 G8 Printing