Rega RS10 - Manuel (Page 7)

5
SPEAKER CABLES AND CONNECTION
The RS-10 loudspeakers are supplied with LF and HF terminals
connected with a wire link. For normal single cable connection the
positive (Red) plug may be connected to either of the Red (+) terminals
and the negative (Black) plug may be connected either of the Black (-)
terminals.
For bi-wiring or bi-amping the wire links can be removed.
CABLE
We recommend using good quality speaker cable such as Rega
loudspeaker cable, terminated with mechanically sound 4mm plugs. Very
expensive leads claiming to use special materials and technologies are
not recommended. Cable lengths to either speaker must be kept to a
similar length. Never join cables together to increase their length.
WARNING
Always switch off the amplifier when connecting or changing
loudspeaker cables. Always ensure there is no possibility of a short
circuit between the positive and negative loudspeaker terminals or wire.
Any short circuit may damage the amplifier.