Chicago Electric Magnesium Heavy Duty Low Speed 1/2" Drill 97594 - Manuel (Page 12)

Page 12 SKU 97594 For technical questions, please call 1-800-444-3353.
Maintenance anD
servicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
to prevent
serious injury
FroM acciDentaL
operation:
turn the power switch of the
tool to its “oFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
to prevent serious
injury FroM tooL
FaiLure:
Do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, Maintenance, and
Lubrication
BeFore eacH use, 1. inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
aFter use,
2. clean external surfaces
of the tool with clean cloth.
To prevent shock, never allow any
3.
liquids to enter the air ports of the tool
housing.
If the Carbon Brushes are damaged 4.
or worn, they must be replaced by a
qualified service technician.
5. warning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.