Cobra Electronics FRS132 - Manuel (Page 7)

7 English
Using Your Radio
Operation
Volume
•
To Adjust the Volume:
1. Press the Volume Up or Volume Down button.
A double beep sound is used to indicate the minimum
and maximum volume levels (1 through 8).
Call Button
•
To Alert Another Person That You Are Calling:
1. Press and release the Call button.
The other person will hear a two (2) second ringing
tone. You cannot send or receive transmissions
during the two (2) second call tone.
“Roger Beep” Confirmation Tone
•
Your listener will hear an audible tone when you
release the Talk button. This alerts the other party that
you are finished talking and it is OK for them to speak.
This feature can be turned On or Off.
When turning On your microTALK
® radio for the first
time, “Roger Beep” will be On.
To Turn “Roger Beep” On or Off:
1. Press and release the Mode/Lock button until the
“Roger Beep” icon flashes. The current On or Off
setting is displayed.
2. Press the Channel Up or Channel Down button to
select “Roger Beep” On or Off.
3. a. Press the Mode/Lock button to enter the new
setting and return to Standby Mode.
b Do not press any buttons for 15 seconds to enter
the new setting and return to Standby Mode.
The setting you select will be saved when you turn
your radio Off and On again. When the “Roger Beep”
is On, the “Roger Beep” icon will be displayed.
Display Illumination
•
To Illuminate Your Display:
1. Press the Light/Max Range button to illuminate the
display for ten (10) seconds.
Call Button
Roger Beep Icon
Roger Beep Off
Light/Max Range
Volume Select
Volume Level
Mode/Lock Button