Tweco 7-3461 - Manuel (Page 2)

Manual / Manuel 0-2927 2 October 22, 2004 / 22 Octobre, 2004
12. Ensure that the insulating sleeve is on the Pilot Lead. Insert the endof the Pilot Lead into the butt splice on the multi-pin
connector. Crimp the splice to fasten the Pilot Lead to the multi-pin connector securely. Slide the insulationg sleeve over
the splice.
13. Connect the multi-pin connector on the Adapter to the receptacle on the Power Supply. Ensure that the connector fits
securely in the receptacle.
A-03682
ATC Adapter Kit
Negative/Plasma
Lead
Torch Control
Connectors
Small
Insulating Sleeve
on Pilot Lead
Ring Terminal
(Removed from
Pilot Lead)
Sleeve and Tie Wrap
Removed
Gas
Fitting
Strain Relief Adapter
Securing Nut
RPT Adapter Kit
Strain Relief
Adapter
Strain Relief
Strain Relief
Dome Nut
Butt Splice
on Pilot Lead
Multi-pin
Connector
To
Power Supply
To Power Supply
Control Circuitry
Torch
Adapter
Torch Lead
Assembly
14. Pull back the locking ring on the Power Supply leads receptacle. Insert the Adapter gas fitting into the recep-
tacle. Release the locking ring. Ensure that the connection is secure.
15. Complete the connections as shown in the following illustrations for the type of torch being used.
Torch Control
Connectors
Small
Insulating
Sleeve
Sleeve and
Tie Wrap
Removed
RPT Adapter Kit
Multi-pin
Connector
To Power Supply
Quick-Release Collar
To Power Supply
Control Circuitry
Not Used
Green / Yellow
Green
Art # A-04227
Orange
Torch Control
Connectors
Small
Insulating
Sleeve
Sleeve and
Tie Wrap
Removed
RPT Adapter Kit
Multi-pin
Connector
To Power Supply
Quick-Release Collar
To Power Supply
Control Circuitry
Not used
Green / Yellow
Green
Art # A-04228
Hand Torch Machine Torch