Crate Amplifiers KX-15 - Manuel (Page 8)

KX-15 Keyboard Amplifier
KX-15 TECHNICAL SPECIFICATIONS:
Maximum Input Signal Level Accepted 15 volts peak to peak
Input Impedance
35k ohms
Total System Gain 46dB @ 1kHz
Signal To Noise Ratio 72dB
Output Power Rating 12+ watts RMS @ 5% THD, 4 ohm load – 120 VAC line
Low Control 15dB Range @ 60Hz
Low Mid Control 18dB Range @ 630Hz
High Mid Control 19dB Range @ 2kHz
High Control 27dB Range @ 10kHz
Input Power Requirements 120 VAC, 60Hz, 30VA
100/110 VAC, 50/60Hz, 30VA
230 VAC, 50/60Hz, 30VA
Speaker Size and Rating Crate Custom Design 8”, 15 watts
Cabinet Size and Weight 13.25” H x 13.125” W x 9” D, 18.5 lbs.
©2002 SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON, ST. LOUIS, MO. U.S.A. 63133
P/N 47-446-03 • 05/02
Crate continually develops new products, as well as improves existing ones. For this reason, the
specifications and information in this Crate manual are subject to change without notice.
Crate continuamente desarrolla nuevos productos, así como también mejora los existentes. Por esta razón,
las especifaciones é información incluidos en este manual están sujetos a cambios sin previo aviso
Crate développe continuellement des nouvels produits, ainsi d'améliorer ceux qui existe. Pour cette raison
les spécifications et les informations dans ce manuel peuvent se changer sans préavis.
www. crateamps.com
The KX-15 is covered with a durable black Tolex material: wipe it clean with a lint-free cloth. Never spray
cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
El KX-15 esta cubierto con un material durable Tolex: limpielo con una toalla seca. Nunca rocie el gabinete con sustancias
limpiadoras. Evite usar materiales abrasivos con los cuales pueda danar el acabado.
Le KX-15 est couvert avec «Tolex» un revêtement noir et durable. Essuyez cette matière avec une toile propre et sans charpie. Ne
pulvérisez jamais les agents de nettoyage sur l'appareil. Evitez les nettoyeurs abrasifs qui peuvent endommager le «Tolex.»
Declaration Of Conformity
#27, Effective 01-01-2001
Manufacturer’s Name: SLM Electronics
Production Facility: 11880 Borman Drive, St. Louis, MO 63146, USA
Production Facility: 700 Hwy 202 W, Yellville, AR 72687, USA
Shipping Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Office Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Product Type: Audio Amplifier
Complies with Standards:
LVD: 92/31/EEC, 93/68/EEC, & 73/23/EWG
Safety: EN60065
EMC: EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3
Supplementary information provided by:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175