Human Touch iJoy HT-2620 Robotic Massage Chair - Manuel (Page 7)

humantouch.com
12 13
ENGLISH
5. Close the zippered pocket and the two backrest zippers.
6. Flip the head pillow over to the front of the chair.
3. Pull the backrest pad outward, then open the zippered pocket inside. 4. Insert or remove the massage-softening pad, as desired.
1. Flip the head pillow over the headrest, to the back of the chair.
2. Open the two backrest zippers most of the way down the backrest;
do not detach the backrest pad from the backrest.
To experience the full power of
Human Touch
just remove the
massage-softening pad.
But keep it handy, in case you
want to replace it in the future.
The massage-softening pad softens the massage intensity. For a stronger massage,
remove the massage-softening pad.
customize massage intensity
Your Human Touch massage chair may have
zippers that are closed with a plastic Security Tie.
Cut the Security Tie with a nail clipper or other
suitable instrument. Take care to not cut the
chair upholstery.
Replacement massage-softening pads are available from Human Touch, for an additional charge.
To keep your product working and looking its best, please follow these simple care guidelines.
care and maintenance
Cleaning:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. Faux Suede products can also be brushed
with a suede brush. Wipe with a slighty damp cloth as necessary. For tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be
wiped down occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior to using the solution on the entire product surface.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
2. Your chair should only be serviced by an authorized service center.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.