Metrohm 822 Titration Curve Simulator - Manuel (Page 24)

4.2 Signification des DELs
16
822 Simulateur de courbes de titrage, Mode d'emploi
SER_OUT - bit 20: DOS_TYP2 Bit 2 definition of the chip
function
SER_OUT - bit 21: DOS_TYP3 Bit 3 definition of the chip
function
SER_OUT - bit 22: P10000 Bit 0 for stating the number of
pulses for the total volume
SER_OUT - bit 23: P20000 Bit 1 for stating the number of
pulses for the total volume
SER_OUT - bit 24: PWR Enables "Hot Plug & Play" of
the device and recognize
temporally unusual supply and
control data
Instructions pour appareil de dosage:
SER_IN - bit 0:
UP Filling impulses for spindle
motor
SER_IN - bit 1: DOWN Dosing impulses for spindle
motor
SER_IN - bit 2: R_NRW Use data or set STROBE
impulse
SER_IN - bit 3: MOT_INFO
MOT_INFO = L:
MOT_INFO = H:
Definition of the digital signals
SER_OUT bit 5 ... 10, 15 ... 17
Information about current
speed of the spindle motor
(MOT_D0…SN) and cock
position (ISTPOS0…2)
Information of the digital inputs
IN0…2, NHWR, NPOR, OVERL,
EXP0…2
SER_IN - bit 4: NRES Reset for dosimat controller
(L activ)
SER_IN - bit 5: OUT0 Bit 0 digital output
SER_IN - bit 6: OUT1 Bit 1 digital output
SER_IN - bit 7: OUT2 Bit 2 digital output
SER_IN - bit 8: POS0 Bit 0 for the default of the
desired cock position
SER_IN - bit 9: POS1 Bit 1 for the default of the
desired cock position
SER_IN - bit 10: POS2 Bit 2 for the default of the
desired cock position
SER_IN - bit 11: DIR Definition of the direction of
rotation of the cock motor
SER_IN - bit 12: STOP_HM Signal to switch off the driver
stage of the cock motor
SER_IN - bit 13: STOP_SM Signal to switch off the driver
stage of the spindle motor
SER_IN - bit 14: P10000 Bit 0 for stating the number of
pulses for the total volume
SER_IN - bit 15: P20000 Bit 1 for stating the number of
pulses for the total volume