Features and controls – Briggs & Stratton 2550 PSI Manuel d'utilisation

Page 11

Advertising
background image

11

Features and Controls

Read this Operator’s Manual and safety rules before operating your pressure washer.

Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.

A - Spray Gun — Controls the application of water onto

cleaning surface with trigger device. Includes trigger lock.

B - Nozzle Extension with Quick Connect — Allows you to

switch between four different nozzles.

C - Warning/Operating Instructions Tag — Identifies

hazards and proper procedure to start/stop pressure
washer.

D - Recoil Starter — Used for starting the engine manually.
E - Fuel Tank — Fill tank with regular unleaded fuel. Always

leave room for fuel expansion.

F - Throttle Lever — Sets engine in starting mode for recoil

starter and stops a running engine.

G- Air Filter — Protects engine by filtering dust and debris

out of intake air.

H - Choke Lever — Prepares a cold engine for starting.
J - Pump — Develops high pressure.
K - Automatic Cool Down System — Cycles water through

pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.

L - Engine Identification — Provides model, type and code

of engine. Please have these readily available if calling for
assistance.

M - High Pressure Outlet — Connection for high pressure hose.
N - Water Inlet
— Connection for garden hose.
P - Cleaning Tank — Use to hold up to one gallon (3.78 l)

of pressure washer safe detergent in tank.

R - Oil Fill / Dipstick — Check, fill and drain engine oil here.
S - High Pressure Hose — Connect one end to water pump

and the other end to spray gun.

T - Accessory Tray — Provides convenient storage for

standard and optional accessories, such as brushes,
turbo wands, etc.

U - Project Pro™ Nozzles — Detergent, 0°, 15° and 40°: for

various high pressure cleaning applications.

Items Not Shown:
Data Tag (near rear of base plate)
— Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.

Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.

E

D

P

A

K

,

J

C

F

T

G

B

R

S

N

,

M

U

H

L

Advertising