Rockwell Automation 1792D-OB4D ArmorBlock MaXum 4 Output Module Series B - Manuel (Page 5)

ArmorBlock MaXum 4 Output Module Series B 5
Publication 1792D-IN040B-EN-P - September 2000
1. Position the module over the mounted cable base. Align the
three captive screws in the module with the accepting
receptacles in the base.
2. Tighten the screws with a torque of 8 inch-pounds to secure
the module to the base.
IMPORTANT
Dimensions change according to the cable base
and module combination used.
Cable Base
1792D-CBFM is
used for this
example.
Assembled dimensions in (mm)
41950
1.9 in
48.26 mm
4.72 in
120 mm
2.7 in
68.6 mm
Align the
screws to
properly
assemble the
module to the
base.