Breville DIECAST 2-SLICE BTA820XL - Manuel (Page 5)

9
Operating your Breville 2-Slice Smart Toaster ™
continued
6. As the toasting cycle nears completion, the
‘TOAST/CANCEL’ button will flash.
7. 10 seconds before the end of the toasting cycle,
the ‘LIFT & LOOK™’ button will cease to
illuminate and the toast will automatically rise
from the toasting slots.
8. The toast ready signal will sound and the
‘TOAST/CANCEL’ button will illuminate white
for up to 30 seconds, ready for the next toasting
cycle. The toasting progress LED’s will
re-illuminate to the selected setting.
The Breville 2-Slice Smart Toaster™ features an
‘A BIT MORE™’ button which can be selected
before or after the toasting cycle. This
automatically lowers the bread carriage for
additional toasting time so you can brown your
toast ‘A BIT MORE™’ until the desired color is
achieved.
Note
8
IN THE UNLIKELY EVENT THAT BREAD, BAGELS OR MUFFINS BECOME JAMMED IN THE
TOASTING SLOTS, ALL THE BUTTONS AND LED’S ON THE TOASTING PROGRESS
INDICATOR WILL FLASH. SWITCH THE TOASTER OFF AT THE POWER OUTLET, REMOVE THE
PLUG AND ALLOW THE TOASTER TO COOL COMPLETELY BEFORE CAREFULLY EASING OUT
THE BREAD. TAKE CARE NOT TO DAMAGE THE ELEMENTS.
‘TOAST/CANCEL’ button
• This button will illuminate white for up to 30
seconds when the appliance is turned on. If no
buttons are selected or the browning control slide
is not moved after 30 seconds, the toaster will
revert to standby mode and the illumination will
go out.
• Press this button once to lower the bread carriage
and start the toasting process. The button will
illuminate red.
• Press this button during operation to cancel the
toasting process or any other function. The button
illumination will change from red to white and stay
illuminated for up to 30 seconds.
‘A BIT MORE™’ button
This feature can be selected before or after the
toasting cycle. It automatically lowers the bread
carriage for additional toasting time so you can
brown your toast ‘A BIT MORE™’ until the desired
color is achieved.
If this feature is selected:
1. The ‘A BIT MORE™’ button will illuminate white.
The bread carriage will automatically lower and
begin the additional toasting time. The third
toasting progress LED will flash and start to
count down the additional browning time.
2. The ‘TOAST/CANCEL’ button will illuminate red.
3. The ‘LIFT & LOOK™’ button will illuminate white
allowing you to check on the toasting
progression and, if necessary, cancel the cycle
with the ‘TOAST/CANCEL’ button when the
desired toast color is achieved.
4. As the additional toasting time nears completion,
the ‘TOAST/CANCEL’ button will flash.
5. 10 seconds before the end of the toasting cycle,
the ‘LIFT & LOOK™’ button will cease to
illuminate and the toast will automatically rise
from the toasting slots.
6. The toast ready signal will sound and the
‘TOAST/CANCEL’ button will illuminate white for
up to 30 seconds, ready for next toasting cycle.
The toasting progress LED’s will re-illuminate to
the selected setting.
‘BAGEL’ button
This feature activates additional heat to the centre
heating elements to cook the insides of your cut
bagel without burning the outside.
To toast bagels:
1. Place the cut bagel into the toasting slots with
the inside of the bagel facing inwards toward the
middle of the toaster.
2. Select the desired browning setting.
3. Press the ‘BAGEL’ button which will illuminate
white. The heating elements will automatically
adjust. The toasting time will also automatically
increase, but will not illuminate more of the
toasting progress LED‘s. It will only increase the
time each LED flashes for.
4. Press the ‘TOAST/CANCEL’ button which will
illuminate red. The bagel will automatically lower
into the toasting slots.
5. The ‘LIFT & LOOK™’ button will illuminate white
allowing you to check on the toasting
progression and, if necessary, cancel the cycle
with the ‘TOAST/CANCEL’ button when the
desired toast color is achieved.
6. As the toasting cycle nears completion, the
‘TOAST/CANCEL’ button will flash.
7. 10 seconds before the end of the toasting cycle,
the ‘LIFT & LOOK™’ button will cease to
illuminate and the toast will automatically rise
from the toasting slots.
8. The toast ready signal will sound and the
‘TOAST/CANCEL’ button will illuminate white for
up to 30 seconds, ready for next toasting cycle.
The toasting progress LED’s will re-illuminate to
the selected setting.