Breville The Juice Fountain Multi-Speed BJE510XL/A - Manuel (Page 11)

11
PAge heAder..... ASSEMBLING yOUR BREvILLE PROdUCT
5. Raise the safety locking arm up and
locate it into the two grooves on either
side of the juicer cover. The safety
locking arm should now be in a vertical
position and locked into place on top of
the juicer cover.
6. Slide the food pusher down the feed
chute by aligning the groove of the food
pusher, with the small protrusion on the
inside top of the feed chute. Continue to
slide the food pusher down into the
feed chute.
7. Place the pulp container into position
by tilting the base of the pulp container
away from the motor base and slide
the top of the pulp container over the
bottom of the juice cover. Tilt the base of
the pulp container back into the motor
base ensuring it is supported by the
container support extending from under
the motor base.
NOTE
To minimize cleaning, line the pulp
container with a produce bag to
collect the pulp. Pulp can then be used
in other dishes, or as compost for the
garden or discarded.
8. Place the juice jug provided under the
spout on the right-hand side of the
juicer. The juice jug lid can be used to
avoid any splatter.
Alternatively you can fit the custom-
designed juice nozzle over the juice
spout and place a glass underneath.
The juice nozzle will prevent splatter,
ensuring mess free juicing.