Humanscale Diffrient Task Light II - Manuel (Page 4)

CLEANING INSTRUCTIONS
Use a soft cloth to clean or dust the lamp. For heavy dirt or residue, use a soft cloth lightly dampened with
soap and water or another mild cleanser. Do not use alcohol, abrasives or harsh solvents.
WARNINGS
Always unplug the lamp from its electrical outlet before removing the shade,
changing bulbs, or cleaning with a damp cloth.
Never operate the lamp where there is a chance that any portion of it, including the
cord, will come into contact with water.
Never touch the underside of the shade while the lamp is on.
Never attempt to replace or repair a damaged power cord. Contact a qualified
professional for power cord replacement or repair.
Bulb: Hg—Lamp contains mercury
Manage in accordance with disposal laws. Visit www.lamprecycle.org
for recycling information.
2. Place the arm of the Diffrient Task Light II into the
mount (e), ensuring it is fully inserted.
3. Make sure the lamp is unplugged and insert the bulb
by aligning the pins with the holes in the socket. Rotate
the bulb clockwise until it clicks into place (f).
CAUTION! Must only use 18W or less DLSLIM type bulb
supplied by Humanscale. Contact Humanscale for all
replacement bulbs: 800-400-0625.
WARNING! Bulb may shatter and cause injury if broken.
Remove and install by grasping plastic portion only.
4. Slide shade over bulb (g) and push until it snaps into
place.
5. Insert polarized plug into electrical outlet.
CAUTION! Lamps sold in North America have a
polarized plug (one blade is wider than the other) to
reduce the risk of electric shock. This plug will fit into
an electrical outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted.
Do not alter the plug.
6. Turn the Diffrient Task Light II on by clicking the on-off
button (h).
ENGLISH
f
g
e
h