Dascom TallyCom III Coax IIF-4 Quick Installation Guide - Manuel (Page 2)

ENGLISH
This Quick Installation Guide explains how to install your
PrintServer.
Caution: Static electricity can damage the interface. You
should either wear an antistatic wrist wrap, or frequently
touch the metal surface of the printer.
Install Interface in Printer
1. Make sure no power cord is connected to the printer.
2. Locate the printer's interface slot by way of the
printer's manual.
3. Remove the plate covering the printer's interface
slot.
4. Insert the interface in the slot as described in the
printer's manual.
Network Installation
1. Make sure no power cord is connected to the printer.
2. Connect network cable to the Coax port on the rear
panel of the interface. Power on the printer.
3. The complete Installation Guide will be printed. Note:
If nothing is printed, please check that the printer is
online and not in an error condition.
Generate Settings Printout
1. Press the TEST button on the back of the
PrintServer.