Dascom MIP480 User Guide - Manuel (Page 104)

Command Sets
C-8
Hs, Lf, Sm: Size parameters
Hs, Ls, Sm Size parameters
The size parameters (Hs, Ls and Sm) specify the pitch as follows.
These size parameters are valid when font ID (Hf, Lf) is not valid.
Null data is ignored.
Dec(Hs,Ls) Hex (Hs,Ls) Description
0,0 - 0,65 0000 - 0041 24 CPI Subscript
0,66 - 0,77 0042 - 004D 20 CPI Subscript
0,78 - 0,89 004E - 0059 17 CPI Normal
0,90 - 0,107 005A - 006B 15 CPI Normal
0,108 - 0,131 006C - 0083 12 CPI Normal
0,132 - 0,155 0084 - 009B 10 CPI Normal
0,156 - 0,179 009C-00B3 8.5 CPI(17 CPI double-wide)
0,180 - 0,215 00B4-00D7 7.5 CPI(15 CPI double-wide)
0,216 - 0,254 00D8 - 00FE 6 CPI (12 CPI double-wide, double-
hight)
0,255 – 256, 256 0100-FFFF 5 CPI (10 CPI double-wide, double-
high)
Note: The Hs and Ls Parameters are effective only when hexadecimal 01 (decimal = 1) is specified
in the Size Modifier parameter (Sm) and Hf Lf is not found.
Sizemod (Sm) : The binary number that is the size modifier. The valid sizes are:
・ 00 -No change
・ 01 - Size measures the width in 0.018 mm (1/1440 in.)
・ 02, 03 - The font is proportional.
・ All other values are regarded as 0.
Hc, Lc: Code page ID
Hc, Lc Code page ID
HC LC(Hex) Code Page
01H
03H
03H
03H
03H
03H
03H
03H
03H
03H
03H
03H
03H
03H
03H
03H
28H
2AH
2AH
B5H
52H
53H
54H
57H
59H
5AH
5CH
5EH
5FH
60H
61H
62H
65H
98H
9BH
C5H
65H
72H
437
850
851
852
855
857
858
860
862
863
864
865
866
869
920
923
437G
853
USSR GOST