Belkin PUREIAV PF31 - Manuel (Page 11)

B
elkin
Pur
eA
V
P
ow
er
C
ons
ole
10
Operation
Central LED Control Panel
The Belkin PureAV Power Console PF31 is equipped with an advanced LED
Control Panel. Most functions of the Power Console can be monitored from
this display.
A. PureFilter indicator – – indicates that the multiphase PureFilter
Circuitry is functioning properly.
B. Voltmeter – displays the input voltage (the amount of voltage coming
from the AC wall outlet to the Power Console).
C. Current Meter – displays the output current (the amount of current
output [in Amps] from the Power Console’s outlets).
D. Wiring OK indicator light – indicates whether the AC outlet to which
the Power Console is connected is wired properly, or cross-wired. If
the Wiring OK indicator does not light, then the hot and neutral wires
are reversed. See page xx of the Troubleshooting section for more
information.
E. Ground OK indicator light – indicates if the Power Console is connected
to a properly grounded AC outlet. If the Ground OK indicator does not
light, this indicates that the AC wall outlet is not properly grounded. See
page xx of the Troubleshooting section for more information.
F. Switched ON indicator light – indicates that the “Switched” outlets are
switched ON.
G. Timed ON indicator light – indicates that the delayed outlets are
switched ON after a delay.
H. Remote ON indicator light – indicates that the Remote function is ON
(controlled with the “Remote” button).
I. Remote Button – switches the Power Console to Remote ON status
when pressed. (When in Remote ON status, the Power Console outlets
that are programmed as switched are turned ON/OFF via external
remote signal [see page xx.])
J. Dimmer Button – adjusts the brightness of the LED Control Panel;
press it repeatedly to change the brightness level.
J I
F
G
H
C
B
A
E
D