4 replacing the inner door, 5 electrical components, Replacing the inner door – Eppendorf New Brunswick -86 °C Freezers Premium Manuel d'utilisation

Page 30: Electrical components, Premium -86 °c freezers — manuel d'utilisation, Entretien

Advertising
background image

Premium -86 °C Freezers — Manuel d'utilisation

30

Abb. 10:

Screw hinge inner door

Fig. 10:

Screw hinge inner door

Repeat procedure for each door.

7.2.4

Replacing the inner door

1. Fully open the outer door of the freezer.
2. Reposition inner door in closed position.
3. Screw on door hinges.
4. If required, adjust by loosening the screws.
5. Close outer door.

7.2.5

Electrical components

Lamps

Regularly check the indicator lamps:

Press the ALARM TEST/MUTE key.
All of the indicator lamps should illuminate, and the display should read 8888.

Alarms

Regularly check the alarm:

Press the ALARM TEST/MUTE key.
The TEMP indicator should illuminate and the audible alarm should sound.

1

2

1 Inner door

2 Door hinge screw x4

AVERTISSEMENT !

Risk of personal injury

During routine maintenance, care must be taken to avoid any damage to the gaskets and
sealing grommets of these enclosures; also check the gaskets and sealing grommets
routinely to ensure their integrity. Should any damage or deformity be detected, the gasket
and/or sealing grommet must be replaced immediately.

Failure to observe this safety warning will invalidate the warranty and could result in a
dangerous situation.

7

Entretien

Advertising