Brinkmann Gourmet Series - Manuel (Page 30)

29
Step 15
Attach the side burner assembly to
the right side of the grill body. Insert
four M6 X 10mm bolts (silver) into
both right legs halfway. Place side
burner assembly over bolts and slide
toward front of grill, then tighten
securely. Fasten side burner front
panel to grill body with one
M6 X 10mm bolt (silver).
Step 16
Attach the hose heat shield to the
right cart frame using two
M4 X 8mm bolts.
Step 17
Remove two bolts and washers from
the side burner valve. Insert the side
burner valve assembly through the
hole in the side burner front panel,
then firmly seat the valve nozzle into
the burner venturi. Hold in place
while you perform Step 18.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section on
“Leak Testing” in this
manual for proper
procedures. Side
Burner
Valve
Burner Venturi
Valve
Nozzle
Hose
Heat Shield