Brinkmann Extra-Long Running Solar Powered Accent Lights 822-1506-B - Manuel (Page 4)

3
Step 1
To form a hanger for the solar light, connect
the hook section with one or two stand
sections, depending on the height desired.
Step 2
Locate an area of solid ground where you
can place your solar lights and insert
ground stake.
Step or press down on ground stake to
aid in driving stake into ground. Make
sure ground stake is inserted all the
way into ground.
NOTE: Ground can be softened by soaking
area with water first.
Step 3
Once ground stake is firmly in place,
insert hanging hook into center hole of
ground stake.
Step 4
Hang light fixture from hanging hook. The
photocell light sensor should point away
from other nighttime light sources.
Step 5
Charge in direct sunlight for 10-12 FULL,
SUNNY DAYS. The light will turn on
automatically at night. Allow at least
10-12 cycles (i.e., 10-12 days and nights
of charging and discharging) for the
battery to charge to its full capacity.
Ground Stake
Hook Section
Hanging Hook
Ground Stake
Stand Sections
OPERATING INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTR-Hanging Cypress_bi.qxd 5/13/03 9:54 AM Page 7