Black & Decker CM9050C - Manuel (Page 4)

6 5
How to Use
This product is for household use only.
BEFORE FIRST USE
Warning: To reduce risk of fire or electric shock, do not immerse cord, plug or
appliance in water or any other liquid.
• Remove all packing material and any stickers from product.
• Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARe AnD CLeAnInG section of
this manual.
• Open water reservoir lid and using carafe, pour fresh
cold water up to 12-cup level mark in water reservoir
(C).
• Close water reservoir lid.
• Place empty gold tone or 8 to 12 cup basket style paper
filter into removable brew basket.
• Place basket into brew basket holder (D).
• Close brew basket lid.
• Close lid on carafe.
• Place empty carafe on adjustable keep warm carafe
plate.
• Pull power cord out from power cord holder in back of
coffeemaker and plug into standard electrical outlet.
• Brew water through appliance following BReWInG COFFee instructions,
without adding coffee grounds.
Note: This removes any dust or residue that may remain in system during
manufacturing process.
• Discard water from carafe and paper filter, if used, from brew basket.
• Turn off coffeemaker, unplug and allow to cool down.
ADJUSTING POWER CORD LENGTH
Tip: You can adjust length of power cord to suit your needs.
1. To increase length of power cord, simply grasp cord (not plug) in rear of
coffeemaker and gently pull down and out of slot away from coffeemaker.
2. To decrease length of power cord, simply feed any excess cord into slot in rear
of coffeemaker.
SETTING THE CLOCK
1. Plug appliance into standard electrical outlet.
2. Digital clock display flashes 12:00
(E).
C
D
CONTROL PANEL
1. Power I/O (ON/OFF) button: Use to turn coffeemaker on and start brewing
process. You can also turn coffeemaker off by pressing this button when the
brewing cycle is complete.
2. Digital display: Displays time, once set, as well as indicators for auto
programming, cup selection, warming plate, and auto clean.
3. Minute button (MIN): Use to display the correct minute when setting the
time.
4. Auto button (AUTO): Press to activate delayed brewing. You may also press
this button to make coffeemaker turn on at same preset time the next day.
5. KEEP WARM: Press to adjust temperature of keep warm carafe plate.
Temperature can be set from levels 1 – 7; default setting is 4. Setting will
show in display window.
6. 1 – 4 CUPS: Press to select a low-volume brew setting for making 1 – 4 cups
of coffee. Icon will appear in display window.
7. TIME SINCE BREWED: Press to check freshness of brewed coffee. When
pressed, display will show how long since coffee was made; time of day will
reappear once button is released.
8. AUTO CLEAN: Sets auto clean function. Follow auto clean instructions in
CARe AnD CLeAnInG.
9. Program button (PROG): Use to program your coffeemaker to start brewing at
a specified time for delayed brewing.
10. Hour button (HR): Use to display correct hour when setting time.










12:00
E