Briggs & Stratton 1900 PSI - Manuel (Page 11)

11
Features and Controls
Read this Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A - Primer Bulb — Prepares a cold engine for starting.
B - Air Filter — Protects engine by filtering dust and debris
out of intake air.
C - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
D - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
E - Pump — Develops high pressure.
F - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F (51°-68°C). Warm
water will discharge from pump onto ground. This system
prevents internal pump damage.
G - Water Inlet — Connection for garden hose.
H - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
J - High Pressure Outlet — Connection for high pressure hose.
K - Detergent Siphoning Tube / Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
L - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
M - Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
N - Oil Fill / Dipstick — Check, fill and drain engine oil here.
P - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
R - Recoil Starter — Used for starting the engine manually.
Items Not Shown:
Data Tag (inside base) — Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
H
B
D
A
F
,
E
G
L
R
J
C
M
N
P
K