Control panel and features, Cycle status lights – Whirlpool WFW97HEDBD Manuel d'utilisation

Page 6

Advertising
background image

6

Cycle Status Lights

The Cycle Status Lights show the progress of a cycle. At each

stage of the process, you may notice sounds or pauses that are

different from traditional washers.

Load & Go

This will be lit when the washer is on with the dispenser

drawer closed and the cartridge in place. If the cartridge is

removed and the drawer is closed, Load & Go will not light.

Detergent Level
Low
– This will light if there is enough detergent in the

Load & Go

cartridge for only a few more cycles.

Empty – This will light if there is no detergent in the

Load & Go

cartridge.

Door Locked
Door Locked will light to indicate that the door is locked and

cannot be opened without first pausing or canceling the cycle.

Add Garment
When Add Garment is lit, you may pause the washer, open

the door, and add items. Touch and hold START to start the

washer again.

Dispensing
This will light when the detergent is being dispensed.

Done
Once the cycle is complete, this light will come on. Remove

the load promptly for best results.

Delay Wash
This will light when a delay time has been set.
Sensing
When START is touched, the washer will first perform a

self-test on the door lock mechanism and the sensing light

will come on. You will hear a click, the drum will make a partial

turn, and the door will click again as it unlocks briefly. The

door will click one more time when it locks again.

Once the door has locked the second time, the washer will

begin tumbling and adding water. This sensing process will

continue throughout the cycle. You may also hear water

flowing through the dispenser, adding detergent to the load.

After the load size is sensed, the estimated time based on

load size will be displayed. The actual cycle time may be

lengthened; however, the display will continue to show the

estimated time.

The sensing light will blink once a second at various times

during the cycle, such as when the washer is reducing extra

suds.

Steaming
This will light to show that the cycle is using steam for added

cleaning power.

FanFresh

®

Option

The FanFresh indicator will light when the FanFresh

®

option

is active. During this time, the washer will occasionally tumble

the load while a fan circulates fresh air through the washer.

Control Panel and Features

Advertising
Ce manuel est liée aux produits suivants: